HPEA Module For T-GRID System(Roomside Replacement)

HPEA Module For Ceiling Suspension(Roomside Replacement)

Advantage

  1. Super thin, light-weighted easy and time saving installation.
  2. Special dimension can be customized.(Example: width 2’, 2.5’, 4’, length can be within 6’.)
  3. Unique inner design allows quick change of filter within 2 minutes without using.
  4. With 4 hanging tabs to fixed to the frame.
  5. Extruded anodized casing body with a faceguard for filter.
  6. unique interior design is adapted to u-groove gel seal filters.

Use

  1. Installed on the T-grid framework of ceiling, can be directly composed to the air duct
  2. Serving as an assembly of filter and casing applicable to the cleanroom or other cleanness required spaces of suspended ceiling system.

Quality

All products manufactured in clean room are 100% qualified through scanning test as guarantee of top quality

HEPA Module for Ceiling Suspension(Roomside replacement)

※Patent approval, counterfeiting is prohibited(Patent size: 149503)



--- A B
本體材質
Casing Material
鋁板(陽極處理)
Aluminum(Extruded Anodized)
聚丙烯PP框
Polypropylene
保溫方式
Heat Insulation
12mmt外保溫
12mmt/External Heat Insulation
入風管尺寸
Upstreamar Duct Dimension
Ø 10",12",14",16"
保溫材
Heat Insulation Material
PE




外型尺寸
Module Dimension
650 x 1258 x 170 mm(DxWxH) 650 x 650 x 170 mm(DxWxH)
過濾網尺寸
Filter Dimension
558 x 1168 x 85 mm(DxWxH) 558 x 558 x 85 mm(DxWxH)
箱體/濾網/總重量
Casing/Filter/Total Weight
12kg/8kg/20kg 8.5kg/5kg/13.5kg
定格風量
Nominal Air Flow
17.5 CMM(620CFM) 8.4 CMM(300CFM)
效率
Efficiency
Ø 0.3µm 99.99%以上、0.1µm~0.2µm 99.9995%以上
Ø 0.3µm more than 99.99%, 0.1µm~0.2µm more than 99.9995%
壓損
Pressure Drop
HPEA 初期 12.5mm W.G.以下、ULPA14.5mm W.G.以下
HPEA Intial:Below 12.5mm W.G., ULPA:Below 14.5mm W.G.
框架
Frame
鋁板(陽極處理)
Aluminum(Extruded Anodized)
濾材
Media
玻璃纖維紙
Fiberglass Paper
保護網
Faceguard
鋁板(陽極處理)
Aluminum (Extruded Anodized)
接著劑
Bond
特殊樹脂
Special Resin

※尺寸皆可依需求訂製。(Special dimension can be customized.)
※外型尺寸W.D.減25mm為嵌板開口開孔尺寸(Casing dimension reducing 25mm in both W&D equals to that of the opening hole of inlaying module)