HPEA Module For T-GRID System(Roomside Replacement)

HPEA Module For T-GRID System(Roomside Replacement)

Advantage

  1. Super thin, light-weighted easy and time saving installation
  2. Special dimension can be customized.(Example: width 2’, 2.5’, 4’, length can be within 6’.)
  3. Patent inner design allows quick change of filter within 2 minutes without using tools also prevents from second pollution.
  4. Extruded anodized casing body with a faceguard for filter
  5. Unique interior design is adapted to groove gel seal filters

Use

  1. Installed on the T-grid framework of ceiling, can be directly composed to the air duct
  2. Serving as an assembly of filter and casing applicable to the cleanroom or other cleanness required spaces of suspended ceiling system.
  3. Replace the traditional ducted ceiling filter, no labor construction being needed.

Quality

All products manufactured in clean room are 100% qualified through scanning test as guarantee of top quality

HEPA Module(Roomside replacement)for T-grid System

※Patent approval, counterfeiting is prohibited (Patent size: 149503)

※Can be used with any brand FFU

--- A B
本體材質
Casing Material
鋁板(陽極處理)
Aluminum(Extruded Anodized)
聚丙烯PP框
Polypropylene
保溫方式
Insulation
12mmt內外保溫或外保溫
12mmt Internal or Out Insulation
入風管尺寸
Ø 10",12",14",16"
保溫材
Material of Insulation
PE



外型尺寸
Module Dimension
過濾網尺寸
Filter Dimension
箱體/濾網/總重量
Casing/Filter/Total Weight
定格風量
Nominal Air Flow
600 x 1210 x 170 mm(DxWxH) 558 x 1168 x 85 mm (DxWxH) 11kg/8kg/19kg 17.5 CMM
(620CFM)
570 x 1170 x 170 mm(DxWxH) 528 x 1128 x 85 mm (DxWxH)
600 x 600 x 170 mm(DxWxH) 558 x 558 x 85 mm(DxWxH) 7.5kg/5kg/12.5kg 8.4 CMM
(300CFM)
570 x 570 x 170 mm(DxWxH) 528 x 528 x 85 mm(DxWxH)

效率
Efficiency
Ø 0.3µm 99.99%以上、0.1µm~0.2µm 99.9995%以上
Ø 0.3µm more than 99.99%, 0.1µm~0.2µm more than 99.9995%
壓損
Pressure Drop
HPEA 初期 12.5mm W.G.以下 ULPA14.5mm W.G.以下
HPEA Intial:Below 12.5mm W.G. ULPA:Below 14.5mm W.G.
框架
Frame
鋁板(陽極處理)
Aluminum(Extruded Anodized)
濾材
Media
玻璃纖維紙
Fiberglass Paper
保護網
Faceguard
鋁板(陽極處理)
Aluminum(Extruded Anodized)
接著劑
Bond
特殊樹脂
Special Resin